Standard

Surface hardening of medical parts made of AISI 304 austenitic stainless steel by nanostructuring burnishing. / Kuznetsov, Viktor; Gorgots, Vladimir; Vorontsov, Igor et al.
In: AIP Conference Proceedings, Vol. 2899, No. 1, 020085, 2023.

Research output: Contribution to journal › Conference article › peer-review

Harvard

Kuznetsov, V, Gorgots, V, Vorontsov, I, Skorobogatov, A & Kosareva, A 2023, 'Surface hardening of medical parts made of AISI 304 austenitic stainless steel by nanostructuring burnishing', AIP Conference Proceedings, vol. 2899, no. 1, 020085. https://doi.org/10.1063/5.0162889

APA

Kuznetsov, V., Gorgots, V., Vorontsov, I., Skorobogatov, A., & Kosareva, A. (2023). Surface hardening of medical parts made of AISI 304 austenitic stainless steel by nanostructuring burnishing. AIP Conference Proceedings, 2899(1), [020085]. https://doi.org/10.1063/5.0162889

Vancouver

Kuznetsov V, Gorgots V, Vorontsov I, Skorobogatov A, Kosareva A. Surface hardening of medical parts made of AISI 304 austenitic stainless steel by nanostructuring burnishing. AIP Conference Proceedings. 2023;2899(1):020085. doi: 10.1063/5.0162889

Author

Kuznetsov, Viktor ; Gorgots, Vladimir ; Vorontsov, Igor et al. / Surface hardening of medical parts made of AISI 304 austenitic stainless steel by nanostructuring burnishing. In: AIP Conference Proceedings. 2023 ; Vol. 2899, No. 1.

BibTeX

@article{d4af85dfc57e47459773f6e9910c1254,
title = "Surface hardening of medical parts made of AISI 304 austenitic stainless steel by nanostructuring burnishing",
abstract = "An experimental study of dependence of the AISI 304 steel surface layer microhardness after nanostructuring burnishing on the technological process parameters was carried out and the optimal combination of values of normal force, feed and the number of tool passes was determined. The experiment was planned to apply the method of Taguchi's L9 typical orthogonal array, which made it possible to rank the loading parameters according to the degree of their influence on the output characteristic of the process and to establish that the maximum contribution to the formation of the surface layer microhardness is made by the number of tool passes. {\textcopyright} 2023 American Institute of Physics Inc.. All rights reserved.",
author = "Viktor Kuznetsov and Vladimir Gorgots and Igor Vorontsov and Andrey Skorobogatov and Anna Kosareva",
note = "Текст о финансировании The research funding from the Ministry of Science and Higher Education of the Russian Federation (Ural Federal University Program of Development within the Priority-2030 Program) is gratefully acknowledged.",
year = "2023",
doi = "10.1063/5.0162889",
language = "English",
volume = "2899",
journal = "AIP Conference Proceedings",
issn = "0094-243X",
publisher = "American Institute of Physics Publising LLC",
number = "1",

}

RIS

TY - JOUR

T1 - Surface hardening of medical parts made of AISI 304 austenitic stainless steel by nanostructuring burnishing

AU - Kuznetsov, Viktor

AU - Gorgots, Vladimir

AU - Vorontsov, Igor

AU - Skorobogatov, Andrey

AU - Kosareva, Anna

N1 - Текст о финансировании The research funding from the Ministry of Science and Higher Education of the Russian Federation (Ural Federal University Program of Development within the Priority-2030 Program) is gratefully acknowledged.

PY - 2023

Y1 - 2023

N2 - An experimental study of dependence of the AISI 304 steel surface layer microhardness after nanostructuring burnishing on the technological process parameters was carried out and the optimal combination of values of normal force, feed and the number of tool passes was determined. The experiment was planned to apply the method of Taguchi's L9 typical orthogonal array, which made it possible to rank the loading parameters according to the degree of their influence on the output characteristic of the process and to establish that the maximum contribution to the formation of the surface layer microhardness is made by the number of tool passes. © 2023 American Institute of Physics Inc.. All rights reserved.

AB - An experimental study of dependence of the AISI 304 steel surface layer microhardness after nanostructuring burnishing on the technological process parameters was carried out and the optimal combination of values of normal force, feed and the number of tool passes was determined. The experiment was planned to apply the method of Taguchi's L9 typical orthogonal array, which made it possible to rank the loading parameters according to the degree of their influence on the output characteristic of the process and to establish that the maximum contribution to the formation of the surface layer microhardness is made by the number of tool passes. © 2023 American Institute of Physics Inc.. All rights reserved.

UR - http://www.scopus.com/inward/record.url?partnerID=8YFLogxK&scp=85176926773

U2 - 10.1063/5.0162889

DO - 10.1063/5.0162889

M3 - Conference article

VL - 2899

JO - AIP Conference Proceedings

JF - AIP Conference Proceedings

SN - 0094-243X

IS - 1

M1 - 020085

ER -

ID: 48552845