Standard

Hydrothermal synthesis of BaCeO3@rGO nanohybrid as electrode material for supercapacitor devices. / Ali, Mahmood; Alrowaily, Albandari; Drissi, Nidhal et al.
In: Journal of Physics and Chemistry of Solids, Vol. 190, 111973, 01.07.2024.

Research output: Contribution to journalArticlepeer-review

Harvard

Ali, M, Alrowaily, A, Drissi, N, Alotaibi, B, Alyousef, H & Henaish, A 2024, 'Hydrothermal synthesis of BaCeO3@rGO nanohybrid as electrode material for supercapacitor devices', Journal of Physics and Chemistry of Solids, vol. 190, 111973. https://doi.org/10.1016/j.jpcs.2024.111973

APA

Ali, M., Alrowaily, A., Drissi, N., Alotaibi, B., Alyousef, H., & Henaish, A. (2024). Hydrothermal synthesis of BaCeO3@rGO nanohybrid as electrode material for supercapacitor devices. Journal of Physics and Chemistry of Solids, 190, [111973]. https://doi.org/10.1016/j.jpcs.2024.111973

Vancouver

Ali M, Alrowaily A, Drissi N, Alotaibi B, Alyousef H, Henaish A. Hydrothermal synthesis of BaCeO3@rGO nanohybrid as electrode material for supercapacitor devices. Journal of Physics and Chemistry of Solids. 2024 Jul 1;190:111973. doi: 10.1016/j.jpcs.2024.111973

Author

Ali, Mahmood ; Alrowaily, Albandari ; Drissi, Nidhal et al. / Hydrothermal synthesis of BaCeO3@rGO nanohybrid as electrode material for supercapacitor devices. In: Journal of Physics and Chemistry of Solids. 2024 ; Vol. 190.

BibTeX

@article{f0a449e571334d078fec6d028b03755c,
title = "Hydrothermal synthesis of BaCeO3@rGO nanohybrid as electrode material for supercapacitor devices",
abstract = "In recent years, supercapacitors attracted researchers as a potential replacement for electrochemical energy storage devices primarily because of their remarkable power density and significantly extended cycle life. This research focuses on synthesis of novel BaCeO3 and BaCeO3@rGO nanohybrids fabricated via hydrothermal route for supercapacitor devices. Various physical and electrochemical analytical techniques used for characterization of fabricated electrode samples. The galvanostatic charge discharge (GCD) plot used to analyze prepared pure BaCeO3 and BaCeO3 @rGO samples. The specific capacitance value for BaCeO3 646 F g−1 and 1488 F g−1 for BaCeO3@rGO. The energy density was also measured to be 65 Wh Kg−1 and power density 324 W kg−1 at 1 A g−1. The incorporation of reduced graphene oxide into BaCeO3 improves conductivity provides more active number of sites enhanced surface area and favors quicker charge transportation which leading to an increase in capacitance. The electrochemical stability fabricated composite that it exhibits stability even after undergoing 5000th cycles. The outstanding efficiency of supercapacitor applications is attributed to mechanical versatility, strong cooperation and combined effects of BaCeO3 and rGO nanosheets. The Nyquist plot investigates lower value of charge transfer resistance 0.87 Ω for BaCeO3@rGO nanohybrids. The observed significant stability of material suggests its potential as a highly prospective candidate for advancing next-generation energy storage devices.",
author = "Mahmood Ali and Albandari Alrowaily and Nidhal Drissi and B. Alotaibi and Haifa Alyousef and A. Henaish",
note = "The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through a small group Research Project under grant number RGP.1/41/44. The authors express their gratitude to Princess Nourah bint Abdulrahman University Researchers Supporting Project (Grant No. PNURSP2024R378), Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia. A.M.A. Henaish thanks the the Ministry of Science and Higher Education of the Russian Federation (Ural Federal University Program of Development within the Priority-2030 Program) is gratefully acknowledged.",
year = "2024",
month = jul,
day = "1",
doi = "10.1016/j.jpcs.2024.111973",
language = "English",
volume = "190",
journal = "Journal of Physics and Chemistry of Solids",
issn = "0022-3697",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Hydrothermal synthesis of BaCeO3@rGO nanohybrid as electrode material for supercapacitor devices

AU - Ali, Mahmood

AU - Alrowaily, Albandari

AU - Drissi, Nidhal

AU - Alotaibi, B.

AU - Alyousef, Haifa

AU - Henaish, A.

N1 - The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through a small group Research Project under grant number RGP.1/41/44. The authors express their gratitude to Princess Nourah bint Abdulrahman University Researchers Supporting Project (Grant No. PNURSP2024R378), Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia. A.M.A. Henaish thanks the the Ministry of Science and Higher Education of the Russian Federation (Ural Federal University Program of Development within the Priority-2030 Program) is gratefully acknowledged.

PY - 2024/7/1

Y1 - 2024/7/1

N2 - In recent years, supercapacitors attracted researchers as a potential replacement for electrochemical energy storage devices primarily because of their remarkable power density and significantly extended cycle life. This research focuses on synthesis of novel BaCeO3 and BaCeO3@rGO nanohybrids fabricated via hydrothermal route for supercapacitor devices. Various physical and electrochemical analytical techniques used for characterization of fabricated electrode samples. The galvanostatic charge discharge (GCD) plot used to analyze prepared pure BaCeO3 and BaCeO3 @rGO samples. The specific capacitance value for BaCeO3 646 F g−1 and 1488 F g−1 for BaCeO3@rGO. The energy density was also measured to be 65 Wh Kg−1 and power density 324 W kg−1 at 1 A g−1. The incorporation of reduced graphene oxide into BaCeO3 improves conductivity provides more active number of sites enhanced surface area and favors quicker charge transportation which leading to an increase in capacitance. The electrochemical stability fabricated composite that it exhibits stability even after undergoing 5000th cycles. The outstanding efficiency of supercapacitor applications is attributed to mechanical versatility, strong cooperation and combined effects of BaCeO3 and rGO nanosheets. The Nyquist plot investigates lower value of charge transfer resistance 0.87 Ω for BaCeO3@rGO nanohybrids. The observed significant stability of material suggests its potential as a highly prospective candidate for advancing next-generation energy storage devices.

AB - In recent years, supercapacitors attracted researchers as a potential replacement for electrochemical energy storage devices primarily because of their remarkable power density and significantly extended cycle life. This research focuses on synthesis of novel BaCeO3 and BaCeO3@rGO nanohybrids fabricated via hydrothermal route for supercapacitor devices. Various physical and electrochemical analytical techniques used for characterization of fabricated electrode samples. The galvanostatic charge discharge (GCD) plot used to analyze prepared pure BaCeO3 and BaCeO3 @rGO samples. The specific capacitance value for BaCeO3 646 F g−1 and 1488 F g−1 for BaCeO3@rGO. The energy density was also measured to be 65 Wh Kg−1 and power density 324 W kg−1 at 1 A g−1. The incorporation of reduced graphene oxide into BaCeO3 improves conductivity provides more active number of sites enhanced surface area and favors quicker charge transportation which leading to an increase in capacitance. The electrochemical stability fabricated composite that it exhibits stability even after undergoing 5000th cycles. The outstanding efficiency of supercapacitor applications is attributed to mechanical versatility, strong cooperation and combined effects of BaCeO3 and rGO nanosheets. The Nyquist plot investigates lower value of charge transfer resistance 0.87 Ω for BaCeO3@rGO nanohybrids. The observed significant stability of material suggests its potential as a highly prospective candidate for advancing next-generation energy storage devices.

UR - http://www.scopus.com/inward/record.url?partnerID=8YFLogxK&scp=85188506137

UR - https://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=tsmetrics&SrcApp=tsm_test&DestApp=WOS_CPL&DestLinkType=FullRecord&KeyUT=001216436000001

U2 - 10.1016/j.jpcs.2024.111973

DO - 10.1016/j.jpcs.2024.111973

M3 - Article

VL - 190

JO - Journal of Physics and Chemistry of Solids

JF - Journal of Physics and Chemistry of Solids

SN - 0022-3697

M1 - 111973

ER -

ID: 55302473