Standard

Correction: Filonova, E.; Pikalova, E. Overview of Approaches to Increase the Electrochemical Activity of Conventional Perovskite Air Electrodes. Materials 2023, 16, 4967. / Filonova, Elena; Pikalova, Elena.
In: Materials, Vol. 16, No. 18, 6278, 2023.

Research output: Contribution to journal › Comment/debate › peer-review

Harvard

Filonova, E & Pikalova, E 2023, 'Correction: Filonova, E.; Pikalova, E. Overview of Approaches to Increase the Electrochemical Activity of Conventional Perovskite Air Electrodes. Materials 2023, 16, 4967', Materials, vol. 16, no. 18, 6278. https://doi.org/10.3390/ma16186278

APA

Filonova, E., & Pikalova, E. (2023). Correction: Filonova, E.; Pikalova, E. Overview of Approaches to Increase the Electrochemical Activity of Conventional Perovskite Air Electrodes. Materials 2023, 16, 4967. Materials, 16(18), [6278]. https://doi.org/10.3390/ma16186278

Vancouver

Filonova E, Pikalova E. Correction: Filonova, E.; Pikalova, E. Overview of Approaches to Increase the Electrochemical Activity of Conventional Perovskite Air Electrodes. Materials 2023, 16, 4967. Materials. 2023;16(18):6278. doi: 10.3390/ma16186278

Author

Filonova, Elena ; Pikalova, Elena. / Correction: Filonova, E.; Pikalova, E. Overview of Approaches to Increase the Electrochemical Activity of Conventional Perovskite Air Electrodes. Materials 2023, 16, 4967. In: Materials. 2023 ; Vol. 16, No. 18.

BibTeX

@article{9fc66d7bd6c84b19b60529b3147ccf3e,
title = "Correction: Filonova, E.; Pikalova, E. Overview of Approaches to Increase the Electrochemical Activity of Conventional Perovskite Air Electrodes. Materials 2023, 16, 4967",
abstract = "In the original publication [1], four references were not cited. These citations as references [225–228] have now been inserted into the caption in Figure 5 and should read as follows: Figure 5. Schemes of methods used to apply electrode layers: (a) slurry application; (b) spraying; (c) screen printing; (d) film casting ((a) is reproduced from [225] with permission of IOP Publishing; (b) is reproduced from [226] with permission of Taylor and Francis; (c) is reproduced from [227]; (d) is reproduced from [228] with permission of J. Wiley and Sons). 225. Ahamad, S.; Ahmad, M.; Mehta, B.R.; Gupta, A. Effect of Nano-Fillers on Capacity Retention and Rate Capability of Mesocarbon Microbeads Anode. J. Electrochem. Soc. 2017, 164, A2967–A2976. https://doi.org/10.1149/2.0351713jes. 226. Verma, R.; Suri, N.M.; Kant, S. Effect of Parameters on Adhesion Strength for Slurry Spray Coating Technique. Mater. Manufact. Proc. 2017, 32, 416–424. https://doi.org/10.1080/10426914.2016.1221090. 227. Creanga, C.; Serban, S.; Pittson, R.; Murr, N.E. “No Calibration” Type Sensor in Routine Amperometric Bio-sensing: An Example of a Disposable Hydrogen Peroxide Biosensor. In Biosensors—Emerging Materials and Applications; InTechOpen: London, UK, 2011; pp. 141–152. https://doi.org/10.5772/17769. 228. Ren, L.; Luo, X.; Zhou, H. The Tape Casting Process for Manufacturing Low-temperature Co-fired Ceramic Green Sheets: A Review. J. Am. Ceram. Soc. 2018, 101, 3874–3889. https://doi.org/10.1111/jace.15694. References [225–460] in the original publication would be updated to [229–464] accordingly. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.",
author = "Elena Filonova and Elena Pikalova",
year = "2023",
doi = "10.3390/ma16186278",
language = "English",
volume = "16",
journal = "Materials",
issn = "1996-1944",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "18",

}

RIS

TY - JOUR

T1 - Correction: Filonova, E.; Pikalova, E. Overview of Approaches to Increase the Electrochemical Activity of Conventional Perovskite Air Electrodes. Materials 2023, 16, 4967

AU - Filonova, Elena

AU - Pikalova, Elena

PY - 2023

Y1 - 2023

N2 - In the original publication [1], four references were not cited. These citations as references [225–228] have now been inserted into the caption in Figure 5 and should read as follows: Figure 5. Schemes of methods used to apply electrode layers: (a) slurry application; (b) spraying; (c) screen printing; (d) film casting ((a) is reproduced from [225] with permission of IOP Publishing; (b) is reproduced from [226] with permission of Taylor and Francis; (c) is reproduced from [227]; (d) is reproduced from [228] with permission of J. Wiley and Sons). 225. Ahamad, S.; Ahmad, M.; Mehta, B.R.; Gupta, A. Effect of Nano-Fillers on Capacity Retention and Rate Capability of Mesocarbon Microbeads Anode. J. Electrochem. Soc. 2017, 164, A2967–A2976. https://doi.org/10.1149/2.0351713jes. 226. Verma, R.; Suri, N.M.; Kant, S. Effect of Parameters on Adhesion Strength for Slurry Spray Coating Technique. Mater. Manufact. Proc. 2017, 32, 416–424. https://doi.org/10.1080/10426914.2016.1221090. 227. Creanga, C.; Serban, S.; Pittson, R.; Murr, N.E. “No Calibration” Type Sensor in Routine Amperometric Bio-sensing: An Example of a Disposable Hydrogen Peroxide Biosensor. In Biosensors—Emerging Materials and Applications; InTechOpen: London, UK, 2011; pp. 141–152. https://doi.org/10.5772/17769. 228. Ren, L.; Luo, X.; Zhou, H. The Tape Casting Process for Manufacturing Low-temperature Co-fired Ceramic Green Sheets: A Review. J. Am. Ceram. Soc. 2018, 101, 3874–3889. https://doi.org/10.1111/jace.15694. References [225–460] in the original publication would be updated to [229–464] accordingly. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

AB - In the original publication [1], four references were not cited. These citations as references [225–228] have now been inserted into the caption in Figure 5 and should read as follows: Figure 5. Schemes of methods used to apply electrode layers: (a) slurry application; (b) spraying; (c) screen printing; (d) film casting ((a) is reproduced from [225] with permission of IOP Publishing; (b) is reproduced from [226] with permission of Taylor and Francis; (c) is reproduced from [227]; (d) is reproduced from [228] with permission of J. Wiley and Sons). 225. Ahamad, S.; Ahmad, M.; Mehta, B.R.; Gupta, A. Effect of Nano-Fillers on Capacity Retention and Rate Capability of Mesocarbon Microbeads Anode. J. Electrochem. Soc. 2017, 164, A2967–A2976. https://doi.org/10.1149/2.0351713jes. 226. Verma, R.; Suri, N.M.; Kant, S. Effect of Parameters on Adhesion Strength for Slurry Spray Coating Technique. Mater. Manufact. Proc. 2017, 32, 416–424. https://doi.org/10.1080/10426914.2016.1221090. 227. Creanga, C.; Serban, S.; Pittson, R.; Murr, N.E. “No Calibration” Type Sensor in Routine Amperometric Bio-sensing: An Example of a Disposable Hydrogen Peroxide Biosensor. In Biosensors—Emerging Materials and Applications; InTechOpen: London, UK, 2011; pp. 141–152. https://doi.org/10.5772/17769. 228. Ren, L.; Luo, X.; Zhou, H. The Tape Casting Process for Manufacturing Low-temperature Co-fired Ceramic Green Sheets: A Review. J. Am. Ceram. Soc. 2018, 101, 3874–3889. https://doi.org/10.1111/jace.15694. References [225–460] in the original publication would be updated to [229–464] accordingly. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

UR - http://www.scopus.com/inward/record.url?partnerID=8YFLogxK&scp=85172775567

UR - https://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=tsmetrics&SrcApp=tsm_test&DestApp=WOS_CPL&DestLinkType=FullRecord&KeyUT=001076592100001

U2 - 10.3390/ma16186278

DO - 10.3390/ma16186278

M3 - Comment/debate

VL - 16

JO - Materials

JF - Materials

SN - 1996-1944

IS - 18

M1 - 6278

ER -

ID: 46009755